Toyota MR2 Toyota MR2
Mitsubishi FTO Mitsubishi FTO
Past Cars Past Cars
Guides Guides
Photos&Videos Photos&Videos
Videogames Videogames
Translations Translations

how to fit an Enzo Styling handbrake cover


Recipe:
Firstly, I compared the length so I didn't need to cut more rubber than needed. Then stripped the rubber slicing it carefully just enough to allow the cover to fit.

Measuring every now and then to check

As the bottom part is bigger, I measured it separately (rubber could be left a bit thicker)

Screwed all the parts of the handbrake cover together and mounted on the handle. Made sure the button on the top made good contact with the button of the handle and that it worked properly, and then inserted the grub screws and tightened securely.

Put the leather gaiter in place, tied it off and voila!


It took me 40 minutes from start to finish.

Follow these guidelines at your own risk.

Note: you are not allowed to copy, distribute or sell this how-to or its pictures, in whole or in part without our express consent.